Usage and maintenance of hot melt glue gun

To help employees safely and effectively use a hot melt glue gun for production operations, standardize the operation steps of employees, enhance the maintenance and maintenance awareness of employees on tools, pinching hot melt glue machine manufacturer to introduce the use of hot melt glue gun and maintenance.

Notes on a hot melt glue gun

1. Before using the hot melt glue gun, please check whether the power supply is energized, whether the bracket is equipped, Whether the used glue gun pushes the glue smoothly.

2. When the hot melt glue gun is used, plug in the power cord and preheat it for about 5 minutes or until the rubber strip is completely melted. Please stand on the table when the glue gun is not in use.

3. After the strip melts, aim the nozzle of the glue gun at the part where the glue is needed and press the trigger gently to let the glue flow out naturally.

4, after using the nozzle downward, unplug the power plug.

5. Do not pull out the rubber strip from the rubber inlet.

6, due to hot melt glue, the gun temperature is very high. You must not touch the gun mouth and melt glue.

Hot melt glue gun maintenance and maintenance

1. Keep the surface of the hot-melt strip clean to prevent impurities from blocking the nozzle.

2. If the glue gun can not be used commonly, please check whether the glue gun has a fever. If the glue gun can not heat usually, the reason may be: the glue gun power supply is not energized;

3, glue gun heater has burned out; If the temperature of the glue gun is expected, the reason may be that impurities block the nozzle. When the rubber strip in the glue gun is not used up, please try not to pull out the rubber strip from the glue gun; otherwise, it may pour glue and affect the glue speed.

4. If the rubber strip in the glue gun backflows, the power supply should be disconnected immediately, and the use should be stopped. It can be used after professional maintenance.

5. If the glue gun is not used after continuous heating for more than 15 minutes, please disconnect the power supply, which can improve the service life of the glue gun

6, avoid using hot melt guns in a humid environment, which may lead to electric shock. Non-professional personnel should not dismantle the hot melt glue gun by themselves.