KEQI AUTOMATION EQUIPMENT

Plasma surface treatment machine , plasma etching technology 1. Folder-gluer plasma polishing processor system The use of conventional water-based cold glue can make the laminated or glazing cardboard be reliably bonded on the folder gluer. There is no need for partial laminating, partial glazing, surface polishing and tangent processes, and it is also no longer necessary because of differences. The cardboard is replaced with different special glues, etc. After plasma surface treatment, it can not only enhance its applicability to glue, no longer rely on special glue to achieve high-quality bonding, but also improve the spreading performance of the surface and prevent the generation of bubbles. The most important thing is that the atmospheric pressure plasma surface treatment can allow carton manufacturers to obtain higher quality high-end products at a lower cost and higher efficiency. 2. Atmospheric atmospheric pressure ion processor equipment technology Atmospheric pressure plasma t

  If many low-end materials have poor adhesion and low processing requirements, they are likely to be treated with flame. Although this method is primitive, it is effective. But not all materials can be treated with flames. Many materials are not resistant to high temperatures. Burning with fire will burn the materials. For example, in the semiconductor industry and electronics industry, many accessories need to be surface treated. This is the case. Use   plasma surface treatment equipment   for treatment. The principle of plasma surface treatment is an ionized gas created by gas pressure charging and discharging. High frequency and high voltage are used on the charging and discharging electrodes, causing a lot of plasma gas to directly or indirectly interact with the molecular structure of the surface. The chain creates carbonylation and nitrogen optically active official groups, which makes the object's interfacial tension continue to rise, the surface is coarsened to remove oil,

  The reaction between the   plasma surface treatment machine   and the surface of the material is both physical and chemical. Through the reaction, the surface of the material will become rough, and at the same time, the oxide can be reduced, making the surface of the material hydrophilic and cohesive. Dyeability, biocompatibility and electrical properties have been greatly improved. The functions of plasma surface treatment equipment mainly include four types: Plasma cleaning function Plasma cleaning can remove inorganic substances or typical -CH organic pollutants and oxides on the surface of the matrix material. However, the thickness of plasma cleaning is only nanometers. If it is to remove oil and rust, it is necessary to replace other processes. Such as ultrasonic cleaning or sandblasting and other processes, plasma cleaning is mainly to improve the hydrophilic properties of the surface of the material, and has little effect on the material itself. As shown below: Plasma activat